New 12MP HD Digital 940nm IR LED Hunting Infrared Scouting Trail
Camera Portable Night Vision Video
- HIGH RESOLUTION: 12MP High Quality Full Color Resolution with 1-3
pictures per trigger (0.9S high trigger speed) and 1080P HD Video
with Audio Record up to 60s
- LONG NIGHT VISION RANGE: with 42pcs 940nm Black IR LED, it allows
the hunting camera to take full color photos or videos in daytime
and black & white color photos or videos at night up to 75
- PATENTED MOTION FREEZE: perfect for the surveillance of reptiles,
cold blooded animals or amphibians, at the same time, it reduces
the inadvertent shoot caused by the leaves or grass, saved power
and SD card storage space
- 2-LEVEL PROTECTION: IP67 High Waterproof Certified, protect your
hunting cam from raining, moist, sand, dust, corrosion etc.
Password needed offers your trail camera another guarantee
- CAPTURE MODES AND TFT LCD: 2.0" Color Viewer TFT LCD exactly shows
all data. 5 Capture Modes bring you more fun: Photo/ Video/ Time
After opening the latches on the right side of the camera, you will
see that it has 8 battery slots.
For maximum battery life, we recommend using 8 lithium AA or
alkaline AA batteries.
Using an External Power Source
Optionally, you can connect an external 6V DC power source to the
"DC In" jack at the bottom of camera.
It is recommended to use a power source with a current output
greater than 1000mA. Please make sure
that the polarity is correct.
Inserting SD Card
This camera have 32MB internal memory, which is for camera upgrade.
Insert the SD card ( OFF mode )
before beginning to operate the camera. SD card is supported up to
maximum 32GB capacity.
Formatting the SD card
Formatting the SD card removes all files on the memory card and
prepares for camera. Press the MENU,
then RIGHT or LEFT key several more times to move to the “Format”
parameter setting menu. Press OK
key to enter sub-menu, Press the UP or DOWN key to highlight YES
and press OK.
THE OFF, ON, and SETUP MODES
The Uovision CAM has three basic operational modes:
The OFF mode is the "safe" mode when any actions must be taken,
e.g. replacing the SD card or batteries,
or transporting the device. You will use OFF mode if you connect
the camera to a computer's USB port
to download your photos/videos.
Once in ON mode no manual controls are needed or possible (the
control keys have no effect). The
KEEPGUARD CAM will take photos or videos automatically (according
to its current parameter settings)
when it is triggered by the PIR sensor′s detection of activity in
the area it covers.
In the SETUP mode you can check and change the settings of the CAM
with the help of
built-in LCD. Moving the power switch to the SETUP position will
turn on the LCD display and you will see an information screen.
Camera button info diagram
UV595-HD Main specifications
12MP, 8MP (Interpolated),
Real 5MP, 3MP
|Lens||F/NO=3.0 FOV(Field of View)=52°|
|Display Screen||2.0” LCD|
|Memory Card||Up to 32GB|
|PIR Sensor||Multi Zone|
|PIR Sensitivity||Adjustable (High/Normal/Low)|
|Weight||0.35 kg(without battery)|
|Operation/Storage Tem.||-20 - +60°C / -30 - +70°C|
|Trigger Interval||0s – 60 min.|
5‐55 second (in 5 second increments)；
1‐59 minutes(in 1 minute increments)；
1-8 hours(in 1 hour increments)；
|Power Supply||4×AA, 8×AA or 12AA|
|Stand-by Current||< 0.25 mA (<6mAh/Day)|
600 videos(interval=5min,video length=10s);
>800 MMS(use 12*AA batteries)
|Low Battery Alert||LED Indicator; SMS alert|
|Operation Humidity||5% - 90%|
|Security authentication||FCC, CE, RoHS|